Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Utica Boiler E-02
DonBaldi
Member Posts: 1
in Gas Heating
Hello -
I recently installed the Utica EB95M-200 modulating gas fired boiler. Upon start up, it goes through the zones, and flashes an E-02. Have gone over everything and can't seem to get a grip on what's up. I am the homeowner but a licensed plumber helped me install. Going to call Utica but I figure I would look on the internet first. I appreciate all the help.
Don
I recently installed the Utica EB95M-200 modulating gas fired boiler. Upon start up, it goes through the zones, and flashes an E-02. Have gone over everything and can't seem to get a grip on what's up. I am the homeowner but a licensed plumber helped me install. Going to call Utica but I figure I would look on the internet first. I appreciate all the help.
Don
0
Comments
-
E-02
If I remember,... E-02 is a failure to light. Reset and monitor. It may be a 1 time thing. This is a soft lock out, but should stay running. I think you can find the error code's in the rear of your installation/Service manual.
Mike T.0
This discussion has been closed.
Categories
- All Categories
- 86.9K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 109 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 976 Plumbing
- 6.3K Radiant Heating
- 387 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements