Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Utica Boiler E-02

DonBaldi
DonBaldi Member Posts: 1
in Gas Heating
Hello -

I recently installed the Utica EB95M-200 modulating gas fired boiler.  Upon start up, it goes through the zones, and flashes an E-02.  Have gone over everything and can't seem to get a grip on what's up.  I am the homeowner but a licensed plumber helped me install.  Going to call Utica but I figure I would look on the internet first.  I appreciate all the help.



Don

Comments

  • Empire_2
    Empire_2 Member Posts: 2,343
    E-02

    If I remember,... E-02 is a failure to light.  Reset and monitor.  It may be a 1 time thing.  This is a soft lock out, but should stay running.  I think you can find the error code's in the rear of your installation/Service manual.





    Mike T.
This discussion has been closed.

Categories