Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Viessmann LLH
Options
28W
Member Posts: 141
in Gas Heating
Does anybody know if the Viessmann low loss header (for the Vitodens 100) contains mesh to help collect microbubbles?
0
Comments
-
Nope
Just a hollow piece of iron...Caleffi and Spirotherm do have them that way and you'll pay for them. But they are sweet...I prefer Taco's for Vitodens 100.
http://www.taco-hvac.com/en/products/products.html?current_category=377There was an error rendering this rich post.
0 -
Thanks
So would it be worth it for me to have a separate microbubble collector installed? I'm not going to have the LLH swapped out.0 -
No
It will work just fine. You can take the little coin vent out. Stick in a 1/2" nip, 1/2" x 1/8" coupling and then screw in a Amtrol or Taco Hy-Vent..There was an error rendering this rich post.
0 -
Hy-vent
I'm pretty sure it already has some type of hy-vent installed on the LLH. Certainly looks like one to me.
As always, the advice is much appreciated. Have a great weekend.0 -
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements