Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
24V to visionPRO for constant backlight
Options
ChrisJ
Member Posts: 15,727
I'm considering running yet another fresh run of wire to my t-stat so I can have the constant backlight feature. My understanding is all it wants is 24V AC which I expect I can pull from the transformer that came with my WM EG-45 boiler by replacing my two wire run with a 3 wire run. I have a spool of 18AWG X4 handy so I might just use that.
My concern is that maybe this actually needs filtered DC and I missed a detail?
My concern is that maybe this actually needs filtered DC and I missed a detail?
Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
0
Comments
-
Nope
Just 24 VAC for vision pro. I have a prestige that is lit up 24 x 7 running off my air handler xformer which is rusty and humms.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements