Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
HousePex connectors
Options
pipe4zen
Member Posts: 108
Looking at a job were homeowner installed HousePex . From there website it says its pexA.
I'm a Uponor guy, I would be connecting boiler, and tubing to manifolds. Can I use Uponor expansion fittings to connect?
Thanks in advance.
I'm a Uponor guy, I would be connecting boiler, and tubing to manifolds. Can I use Uponor expansion fittings to connect?
Thanks in advance.
0
Comments
-
HousePEX
I would call HousePEX for an answer. Uponor tubing is PEX A, but I can see why you want to make sure before you go stretching the stuff.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements