Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Flow rates
Options
Jeff Perry_3
Member Posts: 102
Anyone have a straightforward flow chart for copper pipe that is online that I can give to a contractor I have here locally that I am having a hard time convincing about his pipe size being wrong. Only thing I can find are some fairly complicated engineer websites. I'm looking for a chart like is in Burnham's Heating Helper or Dan's books.
Thanks
Jeff
Thanks
Jeff
0
Comments
-
Flow Chart
Jeff,
Here's Burnham's. The Grundfos handbook should also be available online.Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0 -
Exactly what I need
Interesting that every time I try to get on to any US Boiler or Burnham site my computer will not connect. I can go anywhere else but not to Burnham. Been trying on and off all day. Very odd.
Thanks
Jeff0 -
Flow Rate
For heating systems? Was that why you called me this afternoon? Left you a vm, sorry was in a meeting.
http://www.weil-mclain.com/en/multimedia-library/pdf/weil-mclain-pdf/service-bulletins/SB0008.pdfThere was an error rendering this rich post.
0 -
They Changed
Their web site address to www.us boiler.netThere was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 427 Carbon Monoxide Awareness
- 119 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 165 Indoor-Air Quality
- 3.7K Oil Heating
- 76 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.6K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements