Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
kennyrhem
Options
kennypipes
Member Posts: 2
Does anyone have EDR Rating for the cast iron steam radiators in the attached pictures?
They were made by AA GRIFFING IRON, BAKER SMITH & CO.
the one with is a single row and as seen with the cover off the second is a double row.
They were made by AA GRIFFING IRON, BAKER SMITH & CO.
the one with is a single row and as seen with the cover off the second is a double row.
0
Comments
-
Those are Bundy radiators
go here:
http://www.heatinghelp.com/article/158/Radiators/1262/Bundy-Radiators-for-Steam-and-Hot-Water
You find a lot when you wander off The Wall.
Looks like those Bundys are installed in a Vapor system!All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements