Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
kennyrhem
kennypipes
Member Posts: 2
Does anyone have EDR Rating for the cast iron steam radiators in the attached pictures?
They were made by AA GRIFFING IRON, BAKER SMITH & CO.
the one with is a single row and as seen with the cover off the second is a double row.
They were made by AA GRIFFING IRON, BAKER SMITH & CO.
the one with is a single row and as seen with the cover off the second is a double row.
0
Comments
-
Those are Bundy radiators
go here:
http://www.heatinghelp.com/article/158/Radiators/1262/Bundy-Radiators-for-Steam-and-Hot-Water
You find a lot when you wander off The Wall.
Looks like those Bundys are installed in a Vapor system!All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements