Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit

Taco Training this week

MikeyB Member Posts: 696
I was able to attend a 2 day Taco "Compleat Boiler Room" Training Seminar held by John Barba today and yesterday at Long Islands Wales-Darby Training Facilty, a good time had by all. Thanks again to John Barba & Anthony Tosi (Wales-Darby) for a great job.


  • lchmb
    lchmb Member Posts: 2,997
    a group

    There are 4 of us headed down next Thursday, Friday. Glad to hear it was a good course..:)
  • John Barba
    John Barba Member Posts: 166

    Pleasure having you there MikeyB! You helped make it a fun program!!!
  • John Barba
    John Barba Member Posts: 166
    edited June 2011

  • Techman
    Techman Member Posts: 2,144
    John Barba

    was my instructor a few years ago. It was a pleasure  and I learned a little and learned I didn't know a lot . Then JB  started to sink in and I learned a little more. I have re-read my literature several times  since and learned a little more ,again .Thank's John!

  • Mpj
    Mpj Member Posts: 109

    John I also had a great time at your class and learned a lot.

    Went home on Thursday and log on the flowpro, watched you training videos. The problem I had about CV values we spoke about at lunch, well it hit me like a ton of bricks and I got the Ah Ha moment. Thanks again for the "extra" help.


    PS I still can log onto the "neighborhood" and I did not get your e-mail invite.
  • Ron Jr._3
    Ron Jr._3 Member Posts: 603
    Had a good time too

    in the pm on Tues. at Wales Darby . Thanks John ! Now I know why it takes next to forever for my indirect to heat back up with that 3 speed " radiant " circ that's on there now  .........
This discussion has been closed.