Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Weil-McLain P-466 Gas Retrofit?

Options
IBS_Guy
IBS_Guy Member Posts: 19
in Gas Heating
Hello,

Can anyone tell me if a Weil McLain P-466 can accept a retrofit gas burner? The boiler currently has a Carlin EZ-1 with a 6" blast tube. If the boiler can indeed take a gas fire what would be the proper size blast tube for the EZ-Gas?

I design boiler controls and do industrial oil to gas conversions for a living so I'm not half bad 600hp and above, but I just can't seem to get anywhere trying to talk to either Weil-McLain or Carlin.



All comments welcome,

Thanks

Comments

  • Tim McElwain
    Tim McElwain Member Posts: 4,625
    Options
    Who did you

    talk to at Carlin? Get in touch with Dave Rousayne at Carlin he will give you an official answer to your question. Unofficially so to speak the EZ gas should fit without a problem. Dave will spec the burner for you if in fact he recommends doing it. 
  • IBS_Guy
    IBS_Guy Member Posts: 19
    Options
    Thanks

    Sounds good, Thanks.
  • IBS_Guy
    IBS_Guy Member Posts: 19
    Options
    Follow Up

    Carlin did return my call and they were able to recommend the EZ-Gas with a 10" blast tube and a B diffuser. Now it's off to call the oil man....
This discussion has been closed.

Categories