Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Accurate??

julius
Member Posts: 1
uPON HOOKING UP MY NEW GUAGE IT DROPPED TWICE! ON THE FLOOR.
OBVIOUSLY I AM WONDERING HOW ACCURATE IT IS NOW.Any thoughts out there?
Seems to be working. It was one of the wika steel guages.
OBVIOUSLY I AM WONDERING HOW ACCURATE IT IS NOW.Any thoughts out there?
Seems to be working. It was one of the wika steel guages.
0
Comments
-
howd u do that? lol
I would bet its ok. I think I dropped a vapor guage once and it reads ok. Just make sure the needle is sitting at zero and u can blow on it w ur mouth and the needle will move. I test alot of them that way, just watch out for pipe dope. lol0 -
we've all done that
the only way to be absolutely sure of the post impact accuracy, is to get another; and put it on a tee so you can see whether the 2 readings coincide. assuming they do, you can mount the extra on the vent of an upstairs radiator. on my system, it's the only way i can tell it's running.--nbc0
This discussion has been closed.
Categories
- 117.3K All Categories
- 82.7K THE MAIN WALL
- 2.7K A-C, Heat Pumps & Refrigeration
- 43 Biomass
- 400 Carbon Monoxide Awareness
- 7 Chimneys & Flues
- 1.6K Domestic Hot Water
- 4.3K Gas Heating
- 106 Geothermal
- 148 Indoor-Air Quality
- 2.7K Oil Heating
- 45 Pipe Deterioration
- 674 Plumbing
- 4.8K Radiant Heating
- 353 Solar
- 13.2K Strictly Steam
- 2.9K Thermostats and Controls
- 47 Water Quality
- 31 Industry Classes
- 64 Job Opportunities
- 11 Recall Announcements