indirect domestic hot water heater
Options
CHIEF114
Posts: 1
I am currently using a hot water recirculating system on my domestic HW system. I ran a line from the furthest fixture to the bottom drain of my Indirect HW heater. System works great and I now get HW almost instantly without a pump. I now have to replace my aging HW heater. All the new ones I see now have the cold water enter on the bottom with a tee to a drain. If I connect the line there will the system work?
0
Comments
-
Absolutely
I have done it many times.0 -
oops
--0 -
Most
Most indirect tank mauals have a piping schematic in them that will include how the manufacture recommends piping recirc. lines,0
This discussion has been closed.
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 135 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.2K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements