Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

water pressure problem in hydronic heating system

Options
montreal
montreal Member Posts: 2
in Oil Heating
Hello everyone, I had to replace a leaky radiator in our house and so,I let the water out at the furnce after having closed the city water supply. When I finished replacing the radiator I turned on the city water supply and turned on the furnace(boiler). I am not getting a pressure reading on thr boiler gauge ( approx. 2lbs.). I tried bleeding the radiators and I touched the (I think the refill valve - --dome shaped with a lever on its top). I do not know what else to do , Please could someone point me in the right direction?  Thank you in advance for your much appreciated help!!!  Mike

Comments

  • icesailor
    icesailor Member Posts: 7,265
    Options
    PRV Fill Valve:

    Replace the fill PRV valve, The old one is shot and needs to be replaced.
  • montreal
    montreal Member Posts: 2
    Options
    water p^ressure problem in hydronic heating system

    I just wanted to say THANK YOU!! for your help. I greatly appreciated it in my hour of need. Thank you again maybe one day I will be able to help you or another member .  Mike
This discussion has been closed.

Categories