Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Swing Joints

Options
Logan
Logan Member Posts: 1
in Gas Heating
How many elbos in a proper swing joint and is the length of the nipples important

Comments

  • Charlie from wmass
    Charlie from wmass Member Posts: 4,322
    Options
    three

    length depends on pipe diameter.
    Cost is what you spend , value is what you get.

    cell # 413-841-6726
    https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating
  • Prof
    Prof Member Posts: 10
    Options
    swing joints - no easy answer

    No easy answer, 3 elbow swing joint is considered the "cats pajamas" for entering a building from a riser from the ground, if it is piped correctly. I have seen more, but less won't do, unless it is a sizzor joint, which is for a different application and then you could still use 4 or more there, depending. If it were easy, they wouldn't have paid me $millions$ over the years to do it right...

    Length of nipples depends on pipe size, but typically 4 to 6 inches (depending).
This discussion has been closed.

Categories