Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
how to repair hoffman #8 steam trap
Options
Queen Black
Member Posts: 13
I went today looking for the kit to repair the steam traps in my home. The whole store was stumped! Nobody knew what that thing was that I brought with me. Where can I find the repair kits for the Hoffman #8. That is all I see on the cap of the trap. Is there any place on the trap, other than the cap, that I can find information about this trap.
0
Comments
-
Trap Rebuild Parts
Hi -
Rebuild parts are available for just about any trap. Here are a several sources.
Source for complete traps & parts:
State Supply
http://www.statesupply.com/steamTraps.jsp
Rebuild parts for Steam Traps (Thermostatic, F&T)
Barnes & Jones
http://www.barnesandjones.com/
Tunstall
http://www.tunstall-inc.com/tunstallsteam.html
I haven't dealt with all three of them but the two I did were very helpful.
Sometimes getting the tops off the traps can be hard. I use an air impact wrench which works well. If you don't have a source for an air one I believe that some rental places now have electric impact wrenches.
- Rod
0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements