Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
how to repair hoffman #8 steam trap
Queen Black
Member Posts: 13
I went today looking for the kit to repair the steam traps in my home. The whole store was stumped! Nobody knew what that thing was that I brought with me. Where can I find the repair kits for the Hoffman #8. That is all I see on the cap of the trap. Is there any place on the trap, other than the cap, that I can find information about this trap.
0
Comments
-
Trap Rebuild Parts
Hi -
Rebuild parts are available for just about any trap. Here are a several sources.
Source for complete traps & parts:
State Supply
http://www.statesupply.com/steamTraps.jsp
Rebuild parts for Steam Traps (Thermostatic, F&T)
Barnes & Jones
http://www.barnesandjones.com/
Tunstall
http://www.tunstall-inc.com/tunstallsteam.html
I haven't dealt with all three of them but the two I did were very helpful.
Sometimes getting the tops off the traps can be hard. I use an air impact wrench which works well. If you don't have a source for an air one I believe that some rental places now have electric impact wrenches.
- Rod
0
This discussion has been closed.
Categories
- All Categories
- 86.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 422 Carbon Monoxide Awareness
- 88 Chimneys & Flues
- 2K Domestic Hot Water
- 5.3K Gas Heating
- 99 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 910 Plumbing
- 6K Radiant Heating
- 380 Solar
- 14.8K Strictly Steam
- 3.3K Thermostats and Controls
- 53 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements