Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Gas Training on the ROAD in WOBURN, MA

Tim McElwain
Tim McElwain Member Posts: 4,612
Presents Timmie McElwain

Three seminars being offered are Circuitry & Troubleshooting, Electric Ignition Systems and Advanced Electric Ignition Systems. A breakdown of those three seminars is listed below.

<span style="text-decoration:underline;"> </span>

<span style="text-decoration:underline;">CIRCUITRY AND TROUBLESHOOTING</span>

<strong><span>This is a course for the new service technician. The technician may or may not have had some technical school training. It is also a good course for the technician who needs some help with electrical circuitry. The course will include some basic electricity. It will start out with simple circuits and finish with circuits found on conventional boilers and furnaces. Those typically with standing pilots. It does not include any electric ignition systems or high efficiency equipment. There can be an emphasis on forced hot air or hydronics, depending on the requirements of the trainees. The course includes:</span></strong>

<strong><span style="font-size:12pt">PARTS OF AN ELECTRICAL CIRCUIT</span></strong>

<span style="font-size:12pt">THERMAL ELECTRICITY & ELECTROMAGNETISM</span>

<span style="font-size:12pt">COMPONENTS AND SYMBOLS</span>

<span style="font-size:12pt">ELECTRICAL CIRCUITS AND DIAGRAMS</span>

<span style="font-size:12pt">CONTROL  CENTERS</span>

<span style="font-size:12pt">TEST EQUIPMENT</span>

<span style="font-size:12pt">INTRODUCTION TO HOUSE HEATING</span>

<span style="font-size:12pt">Thermostats               Relays</span>

<span style="font-size:12pt">Gas Valves                 Transformers</span>

<span style="font-size:12pt">Warm Air Systems     Troubleshooting</span>

<span style="font-size:12pt">Hot Water Systems</span>

 

<span style="text-decoration:underline;">ELECTRIC IGNITION SYSTEMS</span>

<span><strong>This course covers all the electric ignition systems in use today on boilers and furnaces. This course will help the service technician to be able to service just about any of the complex boilers and furnaces in the field today. This eliminates the need to take a course on every piece of equipment out today. The course includes:</strong></span>

<strong>INTERMITTENT IGNITION DEVICES </strong>

<strong>FLAME CONDUCTIVITY</strong>

<strong>WHITE RODGERS CYCLE PILOT</strong>

<strong>FLAME RECTIFICATION</strong>

<strong>HONEYWELL SYSTEMS</strong>

<strong>ROBERTSHAW SYSTEMS</strong>

<strong>FENWAL SYSTEMS </strong>

<strong>DIRECT SPARK IGNITION </strong>

<strong>HOT SURFACE IGNITTION</strong>

<strong>CONTROL REPLACEMENT</strong>

 

<span style="text-decoration:underline;"><strong>ADVANCED ELECTRIC IGNITION SYSTEMS</strong></span>

<span><strong>This is a continuation of Electric Ignition Systems course. It is suggested that both courses be taken. The course includes:</strong></span>

<strong>SMARTVALVE™</strong>

<strong>ELECTRONIC FAN TIMERS</strong>

<strong>INTEGRATED BOILER & FURNACE CONTROLS</strong>

<strong>POWER VENTED EQUIPMENT</strong>

<strong>VENT DAMPERS</strong>

<strong> </strong>

<strong>THESE ARE EIGHT (8) HOUR SEMINARS  They include TWO MANUALS FOR EACH SEMINAR. Time 8 AM to 4:30 PM</strong>

 

q       Circuitry & Troubleshooting        $225 per person

Tuesday October 26th

 

q       Electric Ignition Systems              $250 per person

Wednesday October 27th

 

q       Advanced Elec. Ignition Systems <span style="text-decoration:underline;">  $250 per person</span>

Thursday October 28th

 

Total                                                          $725 per person

 

Sign up for all three seminars for $675

 

Three or more techs from one company take $25 off each seminar that’s $650

 

TO BE HELD AT CAPCO ENERGY SUPPLY

10 INDUSTRIAL PARKWAY

WOBURN, MA 01801

PHONE 781-721-0303

 

APPLICATION FOR SEMINAR

<span style="font-size:12pt"> </span>

<strong>Name ____________________________________________</strong>

<strong> </strong>

<strong>Company_________________________________________</strong>

<strong> </strong>

<strong>Street____________________________________________</strong>

<strong> </strong>

<strong>P.O. Box _________________________________________</strong>

<strong> </strong>

<strong>City ___________________ State __________  Zip ______</strong>

<strong> </strong>

<strong>Phone ______________  - ______________ - ___________</strong>

<strong> </strong>

<strong>FAX Number __________- _____________-  ___________</strong>

<strong> </strong>

<strong>e-mail address______________________________________ </strong>

<strong> </strong>

<strong>SEND CHECK OR MONEY ORDER TO –</strong>

<strong>GAS APPLIANCE SERVICE TRAINING AND CONSULTING</strong>

<strong>22 GRIFFITH DRIVE</strong>

<strong>RIVERSIDE, R.I. 02915 </strong>

<strong>401-437-0557</strong>

<strong>FAX 401-270-1893</strong>

<strong>e-mail </strong><a href="mailto:gastc@cox.net">[b][u][color=#0000ff]gastc@cox.net[/color][/u][/b]

or [url=mailto:TimMcelwain@gastc.necoxmail.com][u][color=#0000ff]TimMcelwain@gastc.necoxmail.com[/color][/u]</a>

Comments

This discussion has been closed.