Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
How to attach hardwood to concrete?
Options
Kevin O. Pulver_2
Member Posts: 87
Future basement floor will have wide plank hardwood flooring.
We plan to have tubing in the floor. If we glued 3/4" OSB to the concrete and then attached the hardwood to that, do you see any trouble heating through all that wood, or do you know a better way? Thanks, Kevin
We plan to have tubing in the floor. If we glued 3/4" OSB to the concrete and then attached the hardwood to that, do you see any trouble heating through all that wood, or do you know a better way? Thanks, Kevin
0
Comments
-
put radiant in the walls instead
also they have pre made products that have plastic on the bottom and osb on top to keep the wood of the concrete. OSB on cement will not be stable for holding down wood flooring and will not last long due to rot from the dampness.Cost is what you spend , value is what you get.
cell # 413-841-6726
https://heatinghelp.com/find-a-contractor/detail/charles-garrity-plumbing-and-heating0
This discussion has been closed.
Categories
- All Categories
- 87K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 57 Biomass
- 425 Carbon Monoxide Awareness
- 115 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 107 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 70 Pipe Deterioration
- 983 Plumbing
- 6.3K Radiant Heating
- 389 Solar
- 15.4K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 44 Industry Classes
- 48 Job Opportunities
- 18 Recall Announcements