Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Budurus G115-21 cast iron boiler with a Beckett NX oil burner

Options
coonie11
coonie11 Member Posts: 1
in THE MAIN WALL
I'm about ready to have a Budurus G115-21 boiler with a Beckett NX burner installed in my home.  I'm hearing however that they make a lot of noise.  Is this true?  My other option is a Burnham MPO84 with a Beckett burner but my feeling is I'll get more bang for my buck here in New England with the Budurus.  I wont be able to handle any noise.  Please comment.  Thanks.   Bob

Comments

  • kcopp
    kcopp Member Posts: 4,630
    I have a 115 ....

    in my home. I also install many. I do prefer a Carlin EZ . Depending on the cimney a Riello is a good choice too. I also have heard that the beckett NX is loud from a couple of installers.
  • Steamhead
    Steamhead Member Posts: 18,205
    The MPO comes with the Beckett AFG

    for chimney venting, and this combination is very quiet. I stood next to an MPO in Burnham's trailer when it first came out, and could carry on a normal conversation. 
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Robert O'Brien
    Robert O'Brien Member Posts: 3,584
    Quietest

    The NX is by far the quietest in the 115,as well as the best performer
This discussion has been closed.

Categories