Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Budurus G115-21 cast iron boiler with a Beckett NX oil burner

coonie11
coonie11 Member Posts: 1
in THE MAIN WALL
I'm about ready to have a Budurus G115-21 boiler with a Beckett NX burner installed in my home.  I'm hearing however that they make a lot of noise.  Is this true?  My other option is a Burnham MPO84 with a Beckett burner but my feeling is I'll get more bang for my buck here in New England with the Budurus.  I wont be able to handle any noise.  Please comment.  Thanks.   Bob

Comments

  • kcopp
    kcopp Member Posts: 4,472
    I have a 115 ....

    in my home. I also install many. I do prefer a Carlin EZ . Depending on the cimney a Riello is a good choice too. I also have heard that the beckett NX is loud from a couple of installers.
  • Steamhead
    Steamhead Member Posts: 17,385
    The MPO comes with the Beckett AFG

    for chimney venting, and this combination is very quiet. I stood next to an MPO in Burnham's trailer when it first came out, and could carry on a normal conversation. 
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Robert O'Brien
    Robert O'Brien Member Posts: 3,563
    Quietest

    The NX is by far the quietest in the 115,as well as the best performer
    To learn more about this professional, click here to visit their ad in Find A Contractor.
This discussion has been closed.

Categories