Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
FLEXIBLE BOILER VENTING
Options
MRLOU
Member Posts: 1
VENTING 7 ULTRA 299 BOILERS USING EXISTING CHIMNEYS AS A CHASE....ONE OF THE CHIMNEYS HAS A JOG IN IT....NEED TO FIND A FLEXIBLE VENTING MATERIAL THAT CAN BE USED FOR CONDENSING BOILERS... ANY SUGGESTIONS, NEEDS TO BE 4"
0
Comments
-
Venting
Venting is so important to do it right . Have you checked with the manufacturer ? Then get it in writing and get the OK with the plumbing inspector ... Sounds like you never called ? Don't deviate from an all ready approved system ... First thought anything flexible could bunch up and create a trap for condensate and you ....There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 85.6K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements