Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Good label maker

Options
Big Will
Big Will Member Posts: 395
in THE MAIN WALL
I have a Brady ID pal. It works OK jams sometimes sometimes the printing has voids. The real problem is the  cost of the labels. I love a well labeled mech. room. what do you all use.

Comments

  • Steamhead
    Steamhead Member Posts: 18,203
    An old-school Dymo

    never failed me yet. 
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Big Will
    Big Will Member Posts: 395
    They are bulitproof

    they are really slow though. For instance I have to label control wires a lot. In the project we are doing now their are over 200 labels that need to start with MHCOR Followed by three digits. I think I might by the dymno for the smaller mech rooms were I only need a dozen or so labels.
This discussion has been closed.

Categories