Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Thermal Imaging

MJS
MJS Member Posts: 18
in THE MAIN WALL
Thinking of buying a thermal imaging device in the $2,000 to $4,000 range. Anyone have ones they would recommend? It's primary use will be for locating piping under slabs.

Thanks.

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Devan
    Devan Member Posts: 135
    Flir i7

    is what I have
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,872
    I have the Fluke I10

    Am extremely happy with it, however, in the course of doing an inspection of a boiler with missing refractory, I found that my 250 degree F range was a major limitation.



    I just did finish a series of articles on purchasing an IR camera at Contractor Magazine, http://contractormag.com/hydronics/color-heat-part1-0310/



    Part 2 and 3 have not been published yet.



    ME
  • MJS
    MJS Member Posts: 18
    Thanks for the replies

    and I will look forward to the rest of your article Mark.
This discussion has been closed.

Welcome

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links

Categories