Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Thermal Imaging
Options
MJS
Member Posts: 18
Thinking of buying a thermal imaging device in the $2,000 to $4,000 range. Anyone have ones they would recommend? It's primary use will be for locating piping under slabs.
Thanks.
Thanks.
0
Comments
-
Flir i7
is what I have0 -
I have the Fluke I10
Am extremely happy with it, however, in the course of doing an inspection of a boiler with missing refractory, I found that my 250 degree F range was a major limitation.
I just did finish a series of articles on purchasing an IR camera at Contractor Magazine, http://contractormag.com/hydronics/color-heat-part1-0310/
Part 2 and 3 have not been published yet.
MEIt's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.0 -
Thanks for the replies
and I will look forward to the rest of your article Mark.0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements