Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Thermal Imaging

MJS
MJS Member Posts: 18
in THE MAIN WALL
Thinking of buying a thermal imaging device in the $2,000 to $4,000 range. Anyone have ones they would recommend? It's primary use will be for locating piping under slabs.

Thanks.

Comments

  • Devan
    Devan Member Posts: 135
    Flir i7

    is what I have
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,874
    I have the Fluke I10

    Am extremely happy with it, however, in the course of doing an inspection of a boiler with missing refractory, I found that my 250 degree F range was a major limitation.



    I just did finish a series of articles on purchasing an IR camera at Contractor Magazine, http://contractormag.com/hydronics/color-heat-part1-0310/



    Part 2 and 3 have not been published yet.



    ME
  • MJS
    MJS Member Posts: 18
    Thanks for the replies

    and I will look forward to the rest of your article Mark.
This discussion has been closed.

Categories