Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Nice Looking Radiator Valves
ChasMan
Member Posts: 474
I'm looking for a source of good looking radiator valves. Nickel or chrome plated like they have in Europe except with 1/2" NPT threads. Anyone have a source they want to share?
0
Comments
-
Oventrop
oventrop makes radiator valves in either RH or LH for towel bar warmers....Tapped for 1/2" threads0 -
Ballofix
.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Thanks..
Thanks for the suggestions but it seems the choices are very limited in 1/2 npt. I guess these types of Hydronic radiators are used more in Metric land. I was looking for more choices like these but they are all 15mm.
http://www.featureradiators.co.uk/Valves.htm0
This discussion has been closed.
Categories
- All Categories
- 87.1K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 58 Biomass
- 427 Carbon Monoxide Awareness
- 116 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.7K Gas Heating
- 111 Geothermal
- 163 Indoor-Air Quality
- 3.7K Oil Heating
- 72 Pipe Deterioration
- 1K Plumbing
- 6.4K Radiant Heating
- 393 Solar
- 15.5K Strictly Steam
- 3.4K Thermostats and Controls
- 55 Water Quality
- 49 Industry Classes
- 49 Job Opportunities
- 18 Recall Announcements