Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Nice Looking Radiator Valves
Options
ChasMan
Member Posts: 462
I'm looking for a source of good looking radiator valves. Nickel or chrome plated like they have in Europe except with 1/2" NPT threads. Anyone have a source they want to share?
0
Comments
-
Oventrop
oventrop makes radiator valves in either RH or LH for towel bar warmers....Tapped for 1/2" threads0 -
Ballofix
.8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab0 -
Thanks..
Thanks for the suggestions but it seems the choices are very limited in 1/2 npt. I guess these types of Hydronic radiators are used more in Metric land. I was looking for more choices like these but they are all 15mm.
http://www.featureradiators.co.uk/Valves.htm0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements