Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
O2 Reference
Options
MikeyB
Member Posts: 696
I have a Fyrite Insight Analyzer and am wondering when sampling CO Air Free what is the reason for adjusting the percentage from Zero % O2 reference to another % O2 reference (the analyzer range is 0-15%) when taking flue gas samples, I believe in one of Bacharach's instruction manuals they say that certain Authorities of Jurisdiction might call for an O2 reference of 3% when taking a CO Air Free sample. I am not sure I understand this 100%, thanks for your help guys
0
Comments
-
There was an error rendering this rich post.
0 -
O2 Ref
Will do Mark, thanks0 -
More information...
Don't know if this helps or not, but it is good information to have on hand.
http://www.bacharach-training.com/cozone/whatiscarbonmonoxide1.htm
METhere was an error rendering this rich post.
0 -
Training info
Thanks Mark, this info I have in my collection, I shot an e-mail to Jim Davis, waiting to hear back, I will let you know when I do0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements