Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

O2 Reference

I have a Fyrite Insight Analyzer and am wondering when sampling CO Air Free what is the reason for adjusting the percentage from Zero % O2 reference to another % O2 reference (the analyzer range is 0-15%) when taking flue gas samples, I believe in one of Bacharach's instruction manuals they say that certain Authorities of Jurisdiction might call for an O2 reference of 3% when taking a CO Air Free sample. I am not sure I understand this 100%, thanks for your help guys

Comments

  • Mark Eatherton
    Mark Eatherton Member Posts: 5,839
    Contact Jim Davis

    [email protected]



    If he doesn't have the answer, he knows who to ask.



    ME
    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • MikeyB
    MikeyB Member Posts: 696
    O2 Ref

    Will do Mark, thanks
  • Mark Eatherton
    Mark Eatherton Member Posts: 5,839
    More information...

    Don't know if this helps or not, but it is good information to have on hand.



    http://www.bacharach-training.com/cozone/whatiscarbonmonoxide1.htm



    ME
    It's not so much a case of "You got what you paid for", as it is a matter of "You DIDN'T get what you DIDN'T pay for, and you're NOT going to get what you thought you were in the way of comfort". Borrowed from Heatboy.
  • MikeyB
    MikeyB Member Posts: 696
    Training info

    Thanks Mark, this info I have in my collection, I shot an e-mail to Jim Davis, waiting to hear back, I will let you know when I do
This discussion has been closed.