Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Pipe Dope
Options
steve_164
Member Posts: 10
I am having a problem trying to seal a cpvc 3/4" mpt into a ball valve for a steam boiler feed. Does anyone know of a good dope I can use ?
0
Comments
-
Try
I've used red high temp silicone in that application with good success.0 -
Try
I've used red high temp silicone in that application with good success.0 -
try
Try teflon tape0 -
if you Don't want threads to leak
Use lamp wick (quick wick ) and pipe dope .... Old school but it works ..There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 51 Biomass
- 423 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 60 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 375 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 38 Industry Classes
- 55 Job Opportunities
- 18 Recall Announcements