Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Controls Suggestion

Options
MechTech_2
MechTech_2 Member Posts: 84
in Thermostats and Controls
I'm trying to figure out my best control strategy for attached drawing, which includes simultaneous geothermal heating and cooling, air handlers, radiant floors, pool, boiler, dhw and de-superheater. Any experience and/or suggestions would be greatly appreciated. Any comments or suggestions on the near boiler design would also be welcome.

Comments

  • Dave H_2
    Dave H_2 Member Posts: 622
    Uponor Climate Control - Network System

    take a look at the attached. very similar operation except most of the house was RFH 

    Dave Holdorf

    Technical Training Manager - East

    Taco, Inc

  • MechTech_2
    MechTech_2 Member Posts: 84
    CCN

    Will Uponor custom write the application, or is this part of the canned offering?

    Peter

    Formerly Uponor & Plasco(RTI) 

    P.S. I missed my DHW pump
  • Dave H_2
    Dave H_2 Member Posts: 622
    CCN

    Most of this is already written into the code or has been done in the past, so if custom is needed, a "cut and paste" is all that may be needed.



    Dave Holdorf

    Uponor East Field Tech

    (former RTI Engineer/Designer/Tech Support/........)

    Dave Holdorf

    Technical Training Manager - East

    Taco, Inc

This discussion has been closed.

Categories