Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Locating tubing in concrete
Options
robertm
Member Posts: 1
Would like to add macerating toilet in basement. Is there any reliable method of locating tubing so that we can bolt toilet to floor ?
0
Comments
-
Thermography
Sure. Find someone who has an infra-red digital camera. They work very well to locate tubing quickly. Home inspection companies seem to offer the device, as well as certain leak detection companies.0 -
finding tube
let zone get cold then turn on the zone on mop the floor with lit water the floor will dry were the tube is0 -
Infra red
Thermometer will get you pretty close for 50 bucks. Thats how I found all my tubing in my radiant ceiling. I wanted to install electrical for some ceiling lights. Worked like a charm.
Gordy0 -
back of your hand
This low tech method is very effective.0 -
Stay in the top half of concrete?
If you are dealing with a 4" concrete floor i would guess you would be safe if you were to use something like a 1/4" or 3/8" drop-in anchor. drilling depth should only be about a 1 1/4" or so. The tubing is likely to be more than two inches down.
(This would be true if the tubing were either tied to mesh or stapled to insulation, I am not sure how yours was installed)There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 48 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements