Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

how can I find

Options
allenh
allenh Member Posts: 117
in THE MAIN WALL
a heating contractor that will not shotgun parts and troubleshoot to the actual bad part?



Its a well know American made boiler - Burnham Revolution.



Have intermittent problem where boiler is called in and does not turn on. Had one company go in who were licensed, without a volt meter. They turned power off and on and it fired. I am sure it will happen again. Contractor wanted to just swap out parts by guessing :-(



I would go out there but after falling off a ladder a few days ago I will be home for weeks / months.



Any ideas ? Location is Waltham Mass.

Comments

  • nicholas bonham-carter
    nicholas bonham-carter Member Posts: 8,578
    tech support

    most manufacturers have a tech support line, why not give them a call? unfortunately the safety devices of today, are more difficult to troubleshoot than yesterday's pilot light and thermocouple.--nbc
This discussion has been closed.

Categories