Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

monoflow tees

joe_61
joe_61 Member Posts: 21
on a one pipe system , how many monoflow tees do i need per radiator.On supply/return or both.

Comments

  • Robert_25
    Robert_25 Member Posts: 299
    Monoflow T's

    One monoflow fitting if the radiator is above the main, the monoflow is normally installed on the return.  Use two monoflow fittings if the radiator is below the main, the one installed on the supply side will be mounted in the opposite direction.  Check out the illustration on this page:  http://www.bellgossett.com/Press/BG-monoflo.asp



    -Robert
  • Great link Robert,,,,

    But remember to watch the static resistance in your rads too,,,, even though they may be above the M/F main you may still require two tees.

    Rare,, but possible if using convectors.  :-)
This discussion has been closed.

Welcome

It looks like you're new here. If you want to get involved, click one of these buttons!