GB142 venting

GW · June 2009

g'day, I have a job where I need to "PVC" the venting. can anyone tell me whether the GB can be vented with that BAY flush termination vent kit? I feel i may have known this at one time, but I'm getting old. Of course it;s too late for me to make phone calls to the vendors now. Thanks so much, gw

<A HREF="http://www.heatinghelp.com/getListed.cfm?id=368&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>

GREG LAUER · June 2009

maybe

if gb is glowcore boiler than the first 10 ft has to be schedule 80 cpvc after that pvc yes.

Mad Dog_2 · June 2009

Never heard of a \"BAY\" termination kit

All GBs are good to go with schedule 40 Pvc (NOT FOAM CORE) piping right out of the top hubs. Mad Dog

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

GW · June 2009

BAY

it's a flush mounted termination fitting; like what you see on a W/M gold gas boiler.

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Mad Dog_2 · June 2009

never used one Gary, but as long as....

It complied with GB distances,it would probably be ok..from memory....12". Difference in height and 24". Horizontally???? Don't quote me...just got in from a meeting. Mad dog

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Singh_9 · June 2009

yes

there are three approved methods venting the GB.
1) Seperate termination.
2) Concentric
3) Flat stainless kit (Bay?). It's rectangle in shape and only protrudes
about 2" . It can be mounted horizontally or vertically.

Devan

GW · June 2009

yes

I don't know where I got the word BAY. I think some of the furnace manufacturers use this word.

Thanks for the help

gary

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

Bob Bona_4 · June 2009

you probably

got it from American Standard? I use them all the time.

I've used them on Munchies and TT. Elusive part number, but aesthically the nicest way to terminate sidewall IMO. Almost a 200 diff between the SS plate style and the standard.

GB142 venting

Comments

Categories