Weil McLain Series 80 boiler for steam aplication
Options
Gary P
Posts: 15
I am in the procces of replaceing a stem boiler in an older shop. It has a Burnham V809 and it has failed due to lack of maintenece. The section failed at the water line. I have always prefered a Burnham boiler ina commercial aplication. My supplyer of choice is a Weil Mclain dealer and I have proposed a Weil McLain eries 80 9 section oil fired with a carlin oil burn Low/high/ low operation. I am looking for opinons on the Series 80 Boiler.
0
Comments
-
We have a couple of 4-80 steamers out there
They work well, though I do wish they were 3-pass rather than pin boilers.
Definitely go with lo-hi-lo. Use a Vaporstat to switch firing rates.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
as with any steam boiler -----you need to find out why the previous 1 failed ---0 -
Weil 80
Great boiler....enough said.
Pay attention to the other posts and find out why the boiler failed.0
This discussion has been closed.
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements