Tekmar Tn2

singh · May 2009

So the tN2 thermostats can't connect directly into a tN4 expansion module without a 312 or 313 control?

singh · May 2009

2 wire communicating thermostats from Tekmar

Any one use the TN2 controls yet.
and their cooling control?
Nothing on their website.

Thanks.

Jay_14 · May 2009

tN2 literature

Hello Singh,

Thank you for your interest in tekmar. The new tekmarNet2 equipment is now available. For information see the tekmar website.

Manuals for the new 527, 528, 530 tN2 Thermostats

http://www.tekmarcontrols.com/literature/acrobat/d527.pdf

Manuals for new tN2 Wiring Centers

http://www.tekmarcontrols.com/literature/acrobat/d313.pdf

http://www.tekmarcontrols.com/literature/acrobat/d314.pdf

Sincerely,

Jay Vath

tekmar Control Systems

oil-2-4-6-gas · May 2009

Jay
does TEkmar have a wireless sensor --i'm looking at a few sites that are interested in the #279 control but its multiple buildings

Unknown · May 2009

we've got a couple in the works but nothing deployed yet.

Jay_14 · May 2009

tN2

Hello Singh,

You are correct. A tN2 thermostat cannot directly connect to a tN4 Zone Manager. The reason is that tN4 is a peer to peer communication system, and tN2 as master - slave type of communication system. That allows tN2 to run power and communication over the same wires. All tN2 Wiring Centers and tN2 Zone Managers can convert the tN2 communication to tN4 and are fully compatible with all other tN4 equipment.

There are tN2 Zone Managers and tN2 Zone Expansion Modules for the larger "L" box enclosure as well. These devices are called the 334 and the 324 respectively.

http://www.tekmarcontrols.com/literature/acrobat/d324.pdf

http://www.tekmarcontrols.com/literature/acrobat/d334.pdf

Jay

Tekmar Tn2

Comments

Categories