Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Does anyone know who handles Snyder General oil furnaces ?

g somers
g somers Member Posts: 1
in THE MAIN WALL
does anyone know who handles Snyder General oil furnaces?

Comments

  • John@Reliable_22
    John@Reliable_22 Member Posts: 1
    No one..................

    I think they went out back in the 90's
  • MARTY_15
    MARTY_15 Member Posts: 1


    try gocomfortmaker.com
  • moodihan1959385
    moodihan1959385 Member Posts: 2


    Snyder General was purchased by ICP who owns Heil, Comfortmaker, ArcoAire and Tempstar among others. Some parts are still avail for these units. Sid Harvey carries a good selection of parts for Heil they may have something.
  • John Mills_4
    John Mills_4 Member Posts: 43
    Ducane

    Snyder bought his oil furnaces from Ducane. Usually if parts are available, any ICP supplier can help. Got a model #?
  • Paul Fredricks_9
    Paul Fredricks_9 Member Posts: 315


    We talked to ICP. The unit was made a year before ICP bought them. They had no info, including warranty info. Built in 91, guess it's time to replace rather than repair.
  • billtwocase
    billtwocase Member Posts: 2,384
    furnace

    Paul, alot of that line up is rather poor IMO. I'd look into Thermopride, Olsen, or Williamson. Those beer can heat exchangers don't last more than a few years, 10 if you're lucky. peace
This discussion has been closed.

Categories