Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Does anyone know who handles Snyder General oil furnaces ?
g somers
Member Posts: 1
does anyone know who handles Snyder General oil furnaces?
0
Comments
-
No one..................
I think they went out back in the 90's0 -
try gocomfortmaker.com0 -
Snyder General was purchased by ICP who owns Heil, Comfortmaker, ArcoAire and Tempstar among others. Some parts are still avail for these units. Sid Harvey carries a good selection of parts for Heil they may have something.0 -
Ducane
Snyder bought his oil furnaces from Ducane. Usually if parts are available, any ICP supplier can help. Got a model #?0 -
We talked to ICP. The unit was made a year before ICP bought them. They had no info, including warranty info. Built in 91, guess it's time to replace rather than repair.0 -
furnace
Paul, alot of that line up is rather poor IMO. I'd look into Thermopride, Olsen, or Williamson. Those beer can heat exchangers don't last more than a few years, 10 if you're lucky. peace0
This discussion has been closed.
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 421 Carbon Monoxide Awareness
- 81 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 893 Plumbing
- 5.9K Radiant Heating
- 379 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements