Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
R 410A
Options
adambuild
Member Posts: 414
Go straight to the source: Esco Institute at 800-394-5268, and ask them where testing is done in your area
0
Comments
-
R410A
I am having a hard time finding R410A Traning classes in the Baltimore MD area.I have tried all of the Manuf.Rep. with no luck.Any Help??0 -
Johnstone Supply
Try Johnstone Supply. there doing a lot of classes in the boston area.0 -
410A Class
Check with RE Michel, they have a branch in your area and teach classes on it. It's a good class. But the French go a lot deeper and have stricter regulations than here in the US.
Mark0 -
i did mine with mainstream engineering0 -
Certification
I will be in the DC area at the end of July and might be able to do a training/certification session for you and your guys if you are unable to find a local supplier.Eugene0 -
What regulations?
How are they strictor?
Don in MO0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements