Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

R 410A

adambuild
adambuild Member Posts: 420
in A-C, Heat Pumps & Refrigeration
Go straight to the source: Esco Institute at 800-394-5268, and ask them where testing is done in your area

Comments

  • Servicewiz_3
    Servicewiz_3 Member Posts: 64
    R410A

    I am having a hard time finding R410A Traning classes in the Baltimore MD area.I have tried all of the Manuf.Rep. with no luck.Any Help??
  • Denny Reardon_3
    Denny Reardon_3 Member Posts: 17
    Johnstone Supply

    Try Johnstone Supply. there doing a lot of classes in the boston area.
  • World Plumber
    World Plumber Member Posts: 389
    410A Class

    Check with RE Michel, they have a branch in your area and teach classes on it. It's a good class. But the French go a lot deeper and have stricter regulations than here in the US.
    Mark
  • tgm
    tgm Member Posts: 25


    i did mine with mainstream engineering
  • Eugene_Silberstein
    Eugene_Silberstein Member Posts: 349
    Certification

    I will be in the DC area at the end of July and might be able to do a training/certification session for you and your guys if you are unable to find a local supplier.

    There was an error rendering this rich post.

  • ddlong1286@yahoo.com
    ddlong1286@yahoo.com Member Posts: 139
    What regulations?

    How are they strictor?

    Don in MO
This discussion has been closed.

Categories