ultra series 3 problems
Options
Brian Maffioli_2
Posts: 13
Hey wallies, we recently installed a series 3 ultra and we are having ghost flow problems. does anyone have some different install pictures other than how it is shown in the manual so I can see if its a piping error or if we got some bad pumps (I.F.C.'s)
I dont think we have bad pumps because every zone is heating up when one calls, but im just trying to cover all the bases
I could probably draw up a diagram if needed if someone wants to see how we piped system.
I dont think we have bad pumps because every zone is heating up when one calls, but im just trying to cover all the bases
I could probably draw up a diagram if needed if someone wants to see how we piped system.
0
Comments
-
We do alot of Ultras
Ghost flow never a problem, can you give a better description or photos.
Just a FYI Invision customer support is horrible I do not get updates on posts unless I check back, you may want to e mail me direct.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Hi Mitch, we have 4 heating zones and 1 for DHW.
after spending some time looking at some diagrams I have think I have a flow check in the wrong place. I just cant belive how we are getting ghost flow when all pumps have integral checks0 -
0
This discussion has been closed.
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 133 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 79 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.1K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements