Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Ultra E-02 fault code
Options
Wayco Wayne_2
Member Posts: 2,479
about an Ultra failing regularly on an E-02 code. I've never worked on them before. Any help would be appreciated. WW
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=255&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
<A HREF="http://www.heatinghelp.com/getListed.cfm?id=255&Step=30">To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"</A>
0
Comments
-
Wayne I have...
had this happen 2 times. Could be a few things. Clean up the ignighter first and the chamber. If it is a 155 look to see if the refractory plate is attached properly. I had one where the screws that hold it on we loose because the tabs that lock it in were not bent over. How old is the install?0 -
2 years old
I think. Maybe 3. WW
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
In control supplement
ON Page 20 and 25 if you don't happen to have
http://weil-mclain.com/downloads/literature/ultragas/ultracontrolsupp.pdf0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements