Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
OT--Plumbing ???
Options
Ed Lentz_2
Member Posts: 158
Thanks Ron for the heads up. I knew having that so close was going to have a "Gotcha"
0
Comments
-
I am piping a new tub faucet. it comes down within about 5 feet of my superstor. Would it be kosher to get my supply cold/hot from the input and the output of the superstor? Something in the back of my mind says maybe I shouldn't for some strange supply/demand issue. Any thoughts greatly appreciated!
Thanks0 -
Just watch out
for some backfeed of hot water through the cold pipe if it's teed close to the Superstor . That happens from time to time and we use a simple flap check on the cold pipe of the heater to fix that problem .0 -
heat sink
piping arrangement provide 27 " thermal loop heat sink in lieu of check valve. problem solved0
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 62 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 166 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements
