Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
cut in and cut out
Options
Jamie Hall
Member Posts: 26,761
but I'd start off at a bit less than a pound cut-in on that vaporstat, and let it control.
Br. Jamie, osb
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
0
Comments
-
steam controls
I have a big steam boiler with a preasuretrol and a vapor stat. What should these be set at to assure proper operation?0 -
cut in/out settings
If kind of depends on what you have for a system, Mike.
You need enough steam to fill the last and furthest rad from the boiler. That can only be determined in the field.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
![[Deleted User]](https://secure.gravatar.com/avatar/6013f3dfe90aa7577b3117a5c2e9139f/?default=https%3A%2F%2Fvanillicon.com%2F054c200f25a434cfac0da9a2a03af05a_200.png&rating=g&size=200)
This discussion has been closed.
Categories
- All Categories
- 87.3K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 427 Carbon Monoxide Awareness
- 119 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 114 Geothermal
- 165 Indoor-Air Quality
- 3.7K Oil Heating
- 76 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.6K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements