Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Pump Sizing
Options
Tom Krell
Member Posts: 1
I have a customer with a 168,000 Boiler in a 3 story row house. The house has 3 stories plus a basement. The boiler is in the basement. He currently has a B&G 100. Can I replace it with a Taco 007?
0
Comments
-
size?
arAre you sure the B7G100 was correct? Measure the building as described by Dan H. Pipe size at circ. longest possible run and figure the head at 6'per 100'of run. its the simplest way to get the correct size. Go to Tech tpoics , type in "how to size circulators" ant its right there. Hope this helps.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements