Correct nozzle & specs for my boiler?

Options
Patchogue Phil_28
Patchogue Phil_28 Posts: 32
in THE MAIN WALL
Thanks Alan and John.

At 140 psi with the .85 nozzle, will the effective gph be higher? I know the unit's faceplate says 1.0 gph.

Comments

  • Patchogue Phil_29
    Patchogue Phil_29 Posts: 120
    Nozzle & specs for my boiler?

    Looking for the correct nozzle & specs for my boiler - New Yorker S-AP model S-118. Beckett burner. I checked New Yorker's website but didn't find it.

    Any online sources?

  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Posts: 1,624


    Phil, according to the 2004 Beckett OEM Spec Guide it calls for the following:

    AFG Burner
    F4 Burner Head
    .85x80B Pref. Hago
    140 PSI.

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • John@Reliable_10
    John@Reliable_10 Posts: 99


    New Yorker S-118-AP AFG head-F4 plate-3-3/8"
    nozzle-.85 X 80°B(Hago) pump psi-140
  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Posts: 1,624


    You're very welcome and you're also correct at 140psi a .85 will be approx. 1.01

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

  • Alan R. Mercurio_3
    Alan R. Mercurio_3 Posts: 1,624


    You're very welcome and you're correct at 140psi a .85gph would be approx. 1.01gph

    Your friend in the industry,
    Alan R. Mercurio

    www.oiltechtalk.com

    There was an error rendering this rich post.

This discussion has been closed.

Categories