Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Bronx Guy with Silly question about Oil Burner--

Options
John@Reliable_14
John@Reliable_14 Member Posts: 171
in THE MAIN WALL
Post a photo or name/model#. Some swing from top,some from bottom.

Comments

  • Joseph A
    Joseph A Member Posts: 1
    Bronx Guy with Silly (?) question about Oil Burner--

    Was wondering if there were any Oil Burner Installers who could give a complete amateur some advice?
    The flue pipe on my Weil Mclain Oil Burner fell apart and was put back together by an emergency technician a few weeks ago. Recently I looked at it and noticed that on the The Barometric Draft Damper, the 'weighted' section of the round swinging metal door is on the bottom, but I could have sworn it use to be on the top.

    I guess my question is where is the weighted part of the door on a Barometric Draft Damper for an oil burner supposed to be? And if it is "upside down" is that dangerous?

    Thank you!
  • Paul Fredricks_3
    Paul Fredricks_3 Member Posts: 1,556


    Is there writing on the swinging part that is right side up?
This discussion has been closed.

Categories