Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Becket heat manager w/a set back thermostat?
Options
Mark_122
Member Posts: 5
In a hot water baseboard system I have had a Becket Heat manager installed this season. Now I'm wondering if its compatible with the setback thermostat there? Does the set back mess up the logic process of the BHM?
0
Comments
-
I may not be the best person to answer this question as I have not installed may Heat Managers, but my understanding of the device is that on a call for heat from the thermostat the heat manager check the senor to see if there is any residual heat in the boiler from the last time the burner ran. If there is no residual heat, the burner runs as normal.
Using a set back thermostat should not affect the functionality of the Heat Manager at all.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"There was an error rendering this rich post.
0 -
Norm, you're 100% correct
Your friend in the industry,
Alan R. Mercurio
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"There was an error rendering this rich post.
0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements