Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

insulation for fittings

MikeyB
MikeyB Member Posts: 696
Go to McMaster-Carr's website, they have some pvc cover's for ell's, 45's, tee's, end caps, all different sizes. Pages 3419, and 3420

Welcome

It looks like you're new here. Sign in or register to get started.

Comments

  • Dry Steam
    Dry Steam Member Posts: 32


    I know it was mentioned in aprevious thread, but is their a brush on or moldable insulation for fittings or the ends of the insulation to tidy them up? Thanks for any help!
  • Dry Steam
    Dry Steam Member Posts: 32


    Thanks!!


  • I've seen a high temperature insulated cement used for fittings and gaps How good is this and does anyone have a source where to get it?
  • Dry Steam
    Dry Steam Member Posts: 32


    Yeah that's what I'm talking about. I have some on the older sections of mains in my house, but no idea where to get it?


  • I looked around as I thought I'd seen something like it in one of the pictures posted. Maybe Gerry Gill could tell us about it as I think it was one of his systems.

    I ran across some stuff called Thermocote made by Ramco Insulation but I don't know where to get it or whether it does the job or not. I've a real need for something I can form as I have some interesting twists and turns in my system and am mixing old and new insulation and need to fill gaps etc.

    Scott- This source on fiberglass insulation and fitting insulation was in another post by Tim which I just read.
    http://www1.mscdirect.com/CGI/NNPDFF?PMPAGE=4259&PMITEM=37031051&PMCTLG=00
This discussion has been closed.

Welcome

It looks like you're new here. Sign in or register to get started.